Appendix C System Specifications - Supero SuperServer 5013S-8 User Manual

High-end single xeon processor 1u rackmount server
Table of Contents

Advertisement

Appendix C: System Specifications
Appendix C
System Specifications
Processors
Single Intel Xeon
TM
604/603-pin PGA processors to 3.06 GHz at a 533/
400 MHz front side (system) bus speed
Memory Capacity
Four DIMM slots to support a maximum of 4 GB registered ECC DDR-
266/200 low-profile SDRAM
DIMM Sizes
128 MB / 256 MB / 512 MB 1 GB 184-pin SDRAM modules supported
SCSI Controller (5013S-8 only)
Adaptec AIC-7902 for dual channel Ultra320 SCSI
SCSI Backplane Controller (5013S-8 only)
SCA backplane for two (2) SCA hot-swap SCSI drives
Main Drive Bays
5013S-8: Two (2) drive bays to house two (2) standard 1" 80-pin
SCA SCSI drives
5013S-i: Two (2) drive bays to house two (2) 3.5 x 1" IDE disk drives
Peripheral Bays
One (1) 3.5" floppy drive
One (1) slim CD-ROM drive
PCI Expansion Slots
One (1) 64-bit 66 MHz (5V) PCI slot (bundled with a 64-bit, 66 MHz 5V
riser card)
Power Supply
Type: 1 x 250W with +3.3V, +5V, +12V, -5V and -12V main DC
outputs and a 5V standby output.
Input Voltage: 100-240VAC (w/ ± 10% tolerance - units are auto-
switching capable)
Fans: Two 4-cm ball bearing fans
C-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superserver 5013s-i

Table of Contents