Appendix D System Specifications - Supero SuperServer 5013C-i User Manual

High-end single processor 1u rackmount server
Table of Contents

Advertisement

Appendix D: System Specifications
Appendix D
System Specifications
Processors
Single Intel® Pentium® 4 processors of up to 3.40 GHz with a 2 MB integrated
Advanced Transfer Cache and hyper-threading technology or single Intel®
Celeron® processors of up to 2.40 GHz with a 128KB integrated Advanced
Transfer Cache in 478-pin microPGA sockets at a 800/533/400 MHz front side
bus speed
Chipset
Intel E7210
Memory Capacity
Four (4) DIMM slots to support a maximum of 4 GB unbuffered, ECC/
non-ECC DDR-400/333/266 low-profile SDRAM
DIMM Sizes
256 MB / 512 MB / 1 GB 184-pin modules supported
Serial ATA Controller
ICH5R I/O controller hub incorporated into chipset
Serial ATA Backplane (5013C-T only)
SATA backplane (CSE-SATA-810) for two (2) hot-swap SATA drives
Main Drive Bays
5013C-T: Two (2) drive bays to house two (2) standard 1" 80-pin
SATA drives
5013C-i: Two (2) drive bays to house two (2) 3.5 x 1" IDE disk drives
Peripheral Bays
One (1) 3.5" floppy drive
One (1) slim CD-ROM drive
PCI Expansion Slots
One (1) 32-bit 33 MHz (5V) PCI slot (bundled with a 32-bit, 33 MHz 5V
riser card)
D-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superserver 5013c-t

Table of Contents