Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer
6028TR-DTR/D72R. Installation and maintainance should be performed by
experienced technicians only.
The SuperServer 6028TR-DTR/D72R is a high-end server based on the
SC827HD-R1K28BP 2U rackmount chassis and the dual processor X10DRT-H
serverboard.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the
server system and describes the main features of the X10DRT-H serverboard and
the SC827HD-R1K28BP chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
6028TR-DTR/D72R into a rack and check out the server configuration prior to
powering up the system.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Standardized Safety Warnings
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 6028TR-DTR/D72R.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the X10DRT-H serverboard, including the
locations and functions of connections, headers and jumpers. Refer to this chapter
when adding or removing processors or main memory and when reconfiguring the
serverboard.
Chapter 6: Advanced Chassis Setup
Preface
iii
Preface
Advertisement
Table of Contents
