Table of Contents
Advertisement
VGA Port
A VGA (video) port is provided on the
I/O backplane. This connector is used to
provide video and CRT display.
Unit Identifier Switch
A Unit Identifier (UID) switch (SW1) and an LED indicator are located to the right
of the VGA port. When the user presses the UID switch, the UID indicator will be
turned on. Press the UID switch again to turn off the UID LED. The UID indication
provides easy identification of a system unit that may be in need of service.
IPMB I
C SMB
2
A System Management Bus header
for the IPMI slot is located at JIPMB1.
Connect an appropriate cable here to
use the IPMB I
C connection on your
2
system.
Chassis Intrusion
A Chassis Intrusion header is located
at JL1 on the serverboard. Attach the
appropriate cable from the chassis to
inform you of a chassis intrusion when
the chassis is opened.
Chapter 5: Advanced Serverboard Setup
Pin Definitions
Pin#
1
2
3
4
Chassis Intrusion
Pin Definitions (JL1)
Pin#
1
2
5-15
SMB Header
Definition
Data
Ground
Clock
No Connection
Definition
Intrusion Input
Ground
Advertisement
Table of Contents
