Vatech EzScan-i User Manual page 63

Conducted RF 3V 0.15-
IEC 61000-4-6 80MHz
6V in ISM
bands
between
0.15 MHz
and 80 MHz
80% AM at
1KHz
NOTE: UT is the A.C. mains voltage prior to application of the test level.
3V 0.15- part of the EzScan system,
80MHz including cables, than the
6V in ISM recommended separation
bands distance calculated from the
between equation applicable to the
0.15 MHz frequency of the transmitter.
and 80 MHz Recommended separation
80% AM at distance:
1KHz
where P is the maximum output
power rating of the transmitter in
watts (W) according to the
transmitter manufacturer and d
is the recommended separation
distance in metres (m). Field
strengths from fixed RF
transmitters, as determined by
an electromagnetic site survey,
should be less than the
compliance level in each
frequency range. Interference
may occur in the vicinity of
equipment marked with the
following symbol:
Page 63