Configuring System Settings - Vatech EzScan-i User Manual

5.3 Configuring System Settings

To configure EzScan-i system settings, click the System icon located in the top right-hand
corner of the homepage.
Description
System Setting
System Language
Preferred Output Format
Picture Save Format
Preferred Start Page
Enable Colored ROI Overlay During
Bite Alignment
Enable High-Resolution Finalization
View Software version
(copy function to right)
UI Version
(copy function to right)
Check for Software Updates
User Manual
Teamviewer
Support Page
Description
Select graphical interface language
Select default 3D Output format: STL, PLY, OBJ
Select default image format: .PNG, .JPG
Select Recent Patients or Recent Cases default
start page
Select to display colored ROI overlay during Bite
Alignment. Activated by default. This triggers a
green/red overlay during scan phase to indicate
actively gather data.
Select to enable default high-resolution
finalization
Select to view/copy scanning module software
version
Select to view/copy user interface version
Click Check Now button to manually check for
software updates. An automatic check is done at
launch
Click to access User manual online
Click to allow secure remote control of your
workstation by a Vatech support technician.
Vatech support homepage.
Page 19