Table of Contents
Advertisement
C. Scan a
molar/pre-molar
When you have finished manually
aligning one side of the bite, you will be
prompted to scan the opposing side.
14.
Scan a 3-4 teeth and 3-4mm gum
segment on the RIGHT side molar/pre-
molar region in Occlusion.
15. Carry out the same procedure as described above in steps 1-13.
6.4.6 Auto-Realignment
Once you have carried out the Bite Alignment in the EzScan Scan Workflow, you
can use the Auto-Realignment feature to optimize the scans.
Click on the Auto-Realignment icon in the Scanning Tools menu.
You will be prompted to confirm the optimization.
Click OK to launch the Auto-Realignment
optimization.
NOTE: The auto-realignment may take a few
minutes.
Page 42
bite segment on the opposing side
User Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the EzScan-i and is the answer not in the manual?
Questions and answers