Disposal; Calibration - Vatech EzScan-i User Manual

WARNING
completes its full dry cycle. If the pouch is wet or has any signs of
moisture, this can potentially leave water spots on the mirror
which can affect image quality during scanning.
WARNING
very delicate and is prone to scratching.

9.3 Disposal

TM
The EzScan is an electrical device with electronical components inside and should be
disposed of in accordance with local environmental laws and regulations.

9.4 Calibration

The EzScan is calibrated in the factory and therefore does not require calibration
when installed.
WARNING
system can be destroyed in the case of incorrect use. If
unauthorized changes have been made to the delivered system
and accessories, the warranty by Vatech becomes void. Vatech will
not accept any responsibility or liability for the improper
functioning of the product in such a case.
If the EzScan begins to have problems scanning and recognizing teeth models, contact
your dealer or Vatech support technician.
If the scanner cannot be recalibrated remotely, this may result in the system being
returned for repair/ calibration. See
for further info.
: Do not remove the pouch before the sterilizer
: Use extreme caution when cleaning the mirror as it is
: General prohibition indication. The functionality of the
Section 11 Support, Warranty and Repair Service
Page 55