Setting Up The Ezscan Solution; Connecting Ezscan - Vatech EzScan-i User Manual

4. Setting up the EzScan solution

4.1 Connecting EzScan

Installing and connecting the EzScan solution
To install and connect the EzScan Scanner:
1. Place the docking base on a flat, stable surface and place the EzScan
handpiece securely on the base.
2. Connect the AC/DC power adapter cable to the docking base (the connector
socket is located underneath the base).
3. Connect the provided USB 3.0 cable to the docking base (the connector
socket is located underneath the base).
NOTE: Using a USB cable other than the one provided may result
in system malfunction or reduced performance.
4. Connect the other end of the USB cable to the computer.
Page 12
User Manual