Cabletron Systems Netlink FRX4000 Maintenance Manual page 54

All possible database files are listed in
the operating software files are listed below:
APAD.CMP
FRAME_RE.CMP
LLC2.CMP
RIP.CMP
TRAPD.CMP
VXWORKS.SYM
To copy one or more files to the FRX4000:
1. In Procomm, use
which identifies the directory (in the PC) containing the file(s)
to be copied to the FRX4000.
2. Press at the FRX4000's On-Line Node Operations Menu (or
[E]
from the Main Menu).
[B], [A], [E]
3. Enter the letter corresponding to the desired operation when
asked:
Are you:
A Installing a Software File
B Restoring a Database File
This will ensure that the file(s) will be copied to the right place
in the FRX4000.
4. Press at the FRX4000's On-Line Node Operations Menu (or
[F]
from the Main Menu).
[B], [A], [F]
5. After reading the warning, press
6. Click on the Procomm
files in the
Upload Path
7. Click on the file you want to copy to the FRX4000, then click
on .
OK
8. After the file has been copied to the FRX4000, the On-Line
Node Operations Menu will be displayed. If you want to copy
another file, press
press to exit the menu.
[F3]
Table
BSCI.CMP
IP.CMP
NETVSRVP.CMP
SDLC.CMP
VB.CMP
if necessary to specify an
Setup
.
[Enter]
icon. This will display a list of
Send File
directory.
; otherwise, make another selection or
[F]
B-1(on page B-4), and
EAGLECAF.OUT
IPX.CMP
PL.CMP
SNMPD.CMP
VXWORKS.CMP
,
Upload Path