Installing An Expansion Card - Cabletron Systems Netlink FRX4000 Maintenance Manual

11. Move the motherboard back into position and secure it by
replacing the seven screws. (See
If you were installing only the connector card, the procedure is
finished. If you are also installing an Expansion card, go to step
12.
12. Remove the new Expansion card from its anti-static bag. (Save
the bag for any future need.)
13. Handling the card only by its edges, plug it securely onto the two
motherboard connectors.
Figure 3-11 Installing an Expansion Card
14. Replace the four nylon screws, securing the card to the spacers
on the motherboard.
15. Replace the top by reversing the removal procedure.
3-10
Figure 3-8 on page 3-8.)
FRX4000 Maintenance Guide, Rev 03