M
MMAC Local Management
ICRO
IP Address: xxx.xxx.xxx.xxx
Port:
1
+PORT-
3.5
IPX ROUTER SETUP SCREEN
The IPX Router Setup screen enables you to access the IPX General
Config, IPX RIP, and IPX SAP screens to configure the MicroMMAC for
IPX Routing and enable RIP routing or SAP routing on the MicroMMAC.
Access the IPX Router Setup screen, shown in Figure 3-6, by using the
arrow keys to highlight the IPX field on the Router Setup screen
(Figure 3-2) and pressing ENTER. The IPX Router Setup screen displays.
20
MicroMMAC Local Management
System Level RIP-1:
Port Level RIP-1:
Figure 3-5 IP RIP Configuration Screen
MicroMMAC Local Management Routing Addendum
DISABLED
DISABLED
SAVE
RETURN
2262_05