Table of Contents
Advertisement
M
MMAC Local Management
ICRO
3.3.1
The IP Router Setup Screen Fields
The following list describes each of the Router Setup screen fields:
IP General Config
Use this field to access the IP General Config screen and configure the
MicroMMAC for IP routing.
IP RIP
Use this field to access the IP RIP screen and enable Routing Information
Protocol (RIP) routing on the MicroMMAC.
3.4
THE IP GENERAL CONFIG SCREEN
The IP General Config screen allows you to configure the MicroMMAC
for IP routing.
Access the IP General Config screen by using the arrow keys to highlight
the IP General Config option and then pressing ENTER. The IP General
Config screen shown in Figure 3-4 displays.
Router Name: IP
Version: XX.XX.XX
IP Routing: ENABLED
Redirector: FORWARD
Description: Ctron MicroMMAC
Port: 1
MAC Address: 00-00-1D-22-46-B0
Oper Status:
Enabled
Address: 134.141.17.177
Network Bcast: Ones
IP Routing: ENABLED
+PORT-
10
MicroMMAC Local Management
IP General Config
Status: Enabled
AdminStatusTime: 0 days 0 hours 39 min
System Level Setup
Server:
0.0.0.0
UDP Port:
37
Port Level Setup
EnetPort
Framing: Ethernet
Mask: 255.255.0.0
IP Forwarding: ENABLED
+REDIRECTOR-
Figure 3-4 IP General Config Screen
MicroMMAC Local Management Routing Addendum
UpTime: 0 days 0 hours 39 min
37
of
UDP Type:
Interf. Type: ethernet-csmacd
Address Type: Primary
Proxy ARP: DISABLED
SAVE
999
time
MTU: 1500
RETURN
2262_04
Advertisement
Table of Contents
