Table of Contents
Advertisement
M
MMAC Local Management
ICRO
Interf. Type
Displays the type of interface used by the specified port.
Oper Status
Displays the operational status of the selected port.
3.4.2
IP General Configuration Fields
This section provides a general overview of the procedures required to
configure the MicroMMAC. The following list describes each of the IP
General Config screen fields.
+PORT-
Use this field to select the routing port you wish to configure.
+REDIRECTOR-
Use this field to step through a list of commonly used UDP port numbers.
UDP port numbers are associated with the relay agent functionality of the
router.
Framing
Use this field to select the format of the frame in which IP packets are
encapsulated for transmission.
MTU
Use this field to set the MTU (Maximum Transmission Unit).
Address
Use this field to assign an IP address to the port that you wish to
configure.
Mask
Use this field to set the Subnet Mask for the port that you wish to
configure.
Address Type
Indicates Primary or Secondary address type.
Network Bcast
Indicates if network broadcast uses zeros or ones.
12
MicroMMAC Local Management Routing Addendum
Advertisement
Table of Contents
