Cabletron Systems MicroMMAC 22ES Reference Manual page 30

Local management routing addendum

Hide thumbs Also See for MicroMMAC 22ES:

Table of Contents

MMAC Local Management

ICRO

IPX Routing

Use this ﬁeld to enable IP Routing Services.

IPX Forwarding

Use this ﬁeld to enable IPX Forwarding.

3.6.2.1

Selecting a Port for Conﬁguration

Routing Services enables you to choose the ports that you want to

conﬁgure for IPX routing. To select a router port to conﬁgure for IPX

routing, complete the following steps:

1. Use the arrow keys to highlight the PORT field.

2. Type in the number of the port that you want to configure for IPX

routing, then press ENTER.

You can type in the port number, or you can use the +PORT-

NOTE

option at the bottom of the screen to scroll through the list of

the ports on your device. To use the +PORT- option, use the

arrow keys to highlight the + (to go forward), or the - (to go

backward), and then press ENTER to scroll through the

available ports in the direction you selected. You can also use

the + and - keys to scroll through the available ports.

If you enter an invalid port number the error message: "PORT NUMBER

IS OUT OF RANGE" displays. Repeat steps 1 and 2.

3.6.2.2

Entering the IPX Address

All IPX hosts must have an IPX address for each network interface. These

addresses identify each network connection.

To enter the IPX address for a router port, complete the following steps:

1. Use the arrow keys to highlight the IPX ADDRESS field.

2. Enter the IPX address and press ENTER.

MicroMMAC Local Management Routing Addendum

Table of Contents