Ipx General Configuration Fields - Cabletron Systems MicroMMAC 22ES Reference Manual

The IPX General Configuration Screen
UpTime
Displays the amount of time elapsed since the last time the MicroMMAC
was rebooted.
Version
The version number of the IPX Routing used on the MicroMMAC.
AdminStatusTime
Displays the amount of time elapsed since an IP address was assigned to
the MicroMMAC.
Description
Describes the selected Port.
MAC Address
Displays the physical (MAC) address of the MicroMMAC.
Interf. Type
Displays the type of interface used by the specified port.
Oper Status
Displays the operational status of the selected port.
3.6.2 IPX General Configuration Fields
This section provides a general overview of the procedures required to
configure the MicroMMAC. The following list describes each of the IPX
General Config fields.
+PORT-
Use this field to select the routing port that you are configuring.
MTU
Use this field to set the Maximum Transmission Unit (MTU).
Framing
Use this field to select the format of the frame in which IPX packets are
encapsulated for transmission.
IPX Address
Use this field to assign an IP address to the port that you are configuring.
MicroMMAC Local Management Routing Addendum 23