Structure Of This Guide - Enterasys Matrix E1 1G694-13 Installation Manual

Structure of This Guide

STRUCTURE OF THIS GUIDE
This guide is organized as follows:
This preface provides preliminary information to help you use this guide and a brief summary of
each chapter, defines conventions used in this document, and lists technology and user guides that
may help you set up and manage the 1G694-13 switch.
Chapter 1, Introduction, provides an overview of the switch, and explains how to contact
Enterasys Networks for technical support.
Chapter 2, Network Requirements, provides an overview of the network requirements that must
be met before installing the switch.
Chapter 3, Hardware Installation, provides instructions on how to install the switch on a table top
or into a standard 19-inch rack, install an optional Ethernet expansion module, Mini-GBIC, or
XENPAK module, and connect segments to the switch and any of its installed options.
Chapter 4, Troubleshooting, describes the function of the LANVIEW LEDs and provides
troubleshooting procedures to help diagnose switch operational and related network problems.
Appendix A, Specifications, contains information on port operating specifications, connector
pinouts, environmental requirements, and physical properties for the 1G694-13 and an optional
Ethernet expansion module, Mini-GBICs, XENPAK modules, and the media they support. Also
provided are cable fiber budget and regulatory compliance information.
Appendix B, Mode Switch Bank Settings, describes how to access the Mode Switch Bank and
describes how to use its switches to clear NVRAM of all user-entered parameters to reset them to
the factory default settings, or clear the user-entered passwords and reset them to the factory
default settings. In either case, you can re-enter your user settings.
xiv About This Guide