Mgbic-Lc09 Specifications (1000Base-Lx; Mgbic-08 Specifications (1000Base-Elx; A-13 Mgbic-Lc09 Operating Range; A-14 Mgbic-08 Optical Specifications - Enterasys Matrix E1 1G694-13 Installation Manual

A.5.3

MGBIC-LC09 Specifications (1000BASE-LX)

Table A-12 MGBIC-LC09 Optical Specifications
Item
Transmit Power (minimum)
Receive Sensitivity
Link Power Budget
Table A-13 MGBIC-LC09 Operating Range
Item
62.5 µm MMF
50 µm MMF
50 µm MMF
10 µm SMF
A.5.4

MGBIC-08 Specifications (1000BASE-ELX)

Table A-14 MGBIC-08 Optical Specifications
Item
Transmit Power (minimum)
Receive Sensitivity
Maximum Input Power
Link Power Budget
(Full Duplex Only)
1. The maximum drive distance (up to 70 km) depends on the quality of the installed single-mode fiber-optic
cable segment. Use the Link Power Budget to calculate the maximum cable length of the attached segment.
The Link Power Budget must not exceed those specified in this table. The MGBIC-08 input power must not
exceed -3 dBm. Otherwise, saturation could occur.
62.5 µm MMF
-11.5 dBm
-20 dBm
8.5 dBm
Modal Bandwidth @ 1300 nm
500 MHz/km
400 MHz/km
500 MHz/km
N/A
-0 dBm, min.
-24 dBm, min.
-3 dBm
1
23 dB
Gigabit Ethernet Specifications
50 µm MMF
-11.5 dBm
-20 dBm
8.5 dBm
Range
2-550 Meters
2-550 Meters
2-550 Meters
2-10,000 Meters
+2 dBm, typical
-26 dBm, typical
28 dB, typical
10 µm MMF
-9.5 dBm
-20 dBm
10.5 dBm
+5 dBm, max.
Specifications A-7