Input/Output Specifications For The 10Gbase-Lr; A-5 10Gbase-Lr Optical Specifications; A-6 10Gbase-Lr Operating Range - Enterasys Matrix E1 1G694-13 Installation Manual

Input/Output Specifications for the 10GBASE-LR

A.3 INPUT/OUTPUT SPECIFICATIONS FOR THE 10GBASE-LR
The ZPIM1-06 option slot supports XENPAK 10-Gigabit Ethernet (GbE) standard (802.3ae)
interface plug-in modules. These modules are hot swappable.
the specifications for the 10GBASE-LR module, which is the only module available as of the
printing of this manual.
Warning: The 10GBASE-LR uses Class 1 lasers. Do not use optical instruments to view the laser
output. The use of optical instruments to view laser output increases eye hazard. When viewing
the output optical port, power must be removed from the network adapter.
Advertencia: No se debe usar instrumentos opticos para ver la potencia laser. El uso de los
instrumentos opticos para ver la potencia laser incrementa el riesgo a los ojos. Cuando vean el
puerto de la potencia optica, la corriente debe ser removida del adaptador de la red.
Warnhinweis: Benutzen sie keinesfalls optische Hilfmittel, um die Funktion des Lasers zu
überprüfen. Solche Hilfsmittel erhöhen die Gefahr von Sehschäden. Wenn sie den optischen Port
überprüfen möchten stellen Sie sicher, dass die Komponente von der Spannungsversorgung
getrennt ist.
Table A-4 Port Input/Output Specifications
Item
10GBASE-LR
Table A-5 10GBASE-LR Optical Specifications
Item
Transmit Power (minimum)
Receive Sensitivity
Link Power Budget
Table A-6 10GBASE-LR Operating Range
Item
10 µm SMF
A-4 Specifications
Specification
Provides one SC fiber optic single-mode port that is
compliant with the 10 GbE standard SC connector.
10 µm MMF
-9.5 dBm
-20 dBm
10.5 dBm
Modal Bandwidth @ 1300 nm
N/A
Table A-4 through Table A-6
Range
2-10,000 Meters
provide