Screen Example
Figure 4-2 General Configuration Screen
Field Descriptions
Refer to
Table 4-2
for a functional description of each screen field.
.
Table 4-2 General Configuration Screen Field Descriptions
Use this field...
MAC Address
(Read-Only)
IP Address
(Modifiable)
To...
See the base physical address of the SmartSwitch device.
See the IP address for the SmartSwitch device. To set the IP address,
refer to
Section
4.2.1. The IP address can also be set through Runtime
IP Address Discovery.
Runtime IP Address Discovery enables the SmartSwitch device to
automatically accept an IP address from a Boot Strap Protocol (BootP)
server on the network without requiring a user to enter an IP address
through Local Management.
General Configuration Screen
Device Configuration Menu Screens
4-5