Table of Contents
Advertisement
link_trap
Description:
Allows link traps to be enabled or disabled when specifying a single port, or
simultaneously when specifying "all" or no ports. When one or all ports are
specified to enable, disable, or find their status, their current condition is
displayed.
Syntax:
link_trap [enable/disable/status] <PORT/all>
Options:
None
Example:
-> link_trap status
LINK TRAP STATUS:
-> link_trap disable 2
Link traps have been DISABLED on port 2
-> link_trap disable all
Link traps have been DISABLED on all ports (1-24)
-> link_trap status 3
Link traps are ENABLED on port 3
Port 1
is ENABLED
Port 3
is ENABLED
Port 2
is DISABLED
Port 4
is ENABLED
Network Tools Screens
Built-in Commands
11-11
Advertisement
Table of Contents
