Table of Contents
Advertisement
Built-in Commands
11.2 BUILT-IN COMMANDS
The built-in commands listed in this section activate functions on the LM managed device or
devices being accessed through Network Tools.
arp
Description:
Provides access to the ARP (Address Resolution Protocol) cache, enabling
you to view cache data, delete entries, or add a static route. Super-user access
is required to delete an entry or add a static route.
Each ARP cache entry lists the network interface that the device is connected
to, the device's network address or IP address, the device's physical address
or MAC address, and the media type of connection to the device. Media types
display as numbers, which stand for the following states:
You must specify the arp command with one of the Options specified in this
table.
Syntax:
arp<options>
Options:
11-4
Network Tools Screens
1 – Other
2 – Invalid entry (cannot ping device, timed out, etc.)
3 – Dynamic route entry
4 – Static route entry (not subject to change)
-a –Views cache data
-d – Deletes an IP address entry. Requires additional arguments: [Interface
Number] [IP address]
-s – Adds a static entry. Requires additional arguments: [Interface Number] [IP
address] [MAC address]
-f – Flushes the ARP cache
Advertisement
Table of Contents
