Screen Example
Figure 6-2 Switch Configuration Screen
Field Descriptions
Refer to
Table 6-2
for a functional description of each screen field.
Table 6-2 Switch Configuration Screen Field Descriptions
Use this field...
Switch Address
(Read-Only)
Number of Ports
(Read-Only)
Type of STA
(Toggle)
To...
See the base MAC address of the SmartSwitch device.
See the total number of switched ports on the SmartSwitch device.
Depending on the optional interfaces, there can be many virtual WAN
or ATM ports that will display on this screen.
Set the method (Spanning Tree Algorithm) that switches use to decide
which SmartSwitch device is the controlling (Root) switch. Valid
selection is IEEE, DEC, and None. To set the STA, refer to
Section
6.2.1.
Switch Configuration Screen
802.1 Configuration Menu Screens
6-5