Table of Contents
Advertisement
5. Use the arrow keys to highlight the Frame Format field near the bottom of the screen.
6. Use the SPACE bar or BACKSPACE key to step to the appropriate frame format setting
(NORMAL, TAGGED, or UNTAGGED) for the selected Destination Port.
7. Use the arrow keys to highlight the Redirect Errors field near the bottom of the screen.
8. Use the SPACE bar to select either the ON or OFF option and press ENTER. ON forces the
source port to forward errored frames to the destination port(s). OFF forces the errored frames
to be dropped before forwarding traffic.
9. Use the arrow keys to highlight the Status field.
10.Use the SPACE bar to select either the ADD or DEL (delete) option. Press ENTER. This adds
or deletes the selections for the Source Port, Destination Port, Frame Format, and Redirect
Errors made in steps 1 through 8 and also updates the screen.
TIP: If more than 1 port is being redirected, repeat steps 1 through 10 for each
additional setting. Then go to step 11 to save all the new settings at once.
If an entry is to be changed, delete the entry, save the screen, then recreate the entry
with its new settings.
Any combination, up to 128, of port redirect instances (configured on the Port Redirect
Configuration screen) and/or VLAN redirect instances (configured on the VLAN Redirect
Configuration screen) can be configured.
11.Use the arrow keys to highlight SAVE at the bottom of the screen. Press ENTER. The message
"SAVED OK" displays. This saves the new settings and updates the Source Port and Destination
Port read-only fields.
Port Redirect Configuration Screen
Port Configuration Menu Screens
5-17
Advertisement
Table of Contents
