Walkthrough Stage One, Static Vlan Configuration Screen - Enterasys 2H25x User Manual

Quick VLAN Walkthrough
Figure 12-6 Walkthrough Stage One, Static VLAN Configuration Screen
It is now time to assign a port to this new VLAN.
9. Use the arrow keys to highlight the RETURN command at the bottom of the screen. Press
ENTER. The 802.1Q VLAN Configuration Menu screen displays. Use the arrow keys to select
the PORT ASSIGNMENT CONFIGURATION menu item and press ENTER. The Port
Assignment Configuration screen displays.
NOTE: For the purposes of this walkthrough, port 3 will be configured.
10.Use the arrow keys to highlight the VLAN ID field for the module and port combination you
wish to change.
NOTE: As this port will connect to a single workstation, and is not to be used for
switch-to-switch communications, it is not necessary to change the PORT MODE from
the default setting of HYBRID.
12-16 VLAN Operation and Network Applications