Table of Contents
Advertisement
Built-in Commands
soft_reset
Description:
Restarts the software image, which restores the user configuration settings
from NVRAM. The user will be queried to confirm the reset command to
ensure against unwanted resets.
Syntax:
soft_reset
Options:
Example:
->soft_reset
RESET: Are you *SURE* ? -> Y
telnet
Description:
Syntax:
Options:
Example:
11-10
Network Tools Screens
TIP: The Network Tools connection to the device will be terminated
upon execution of this command.
None
Allows the user to communicate with another host (that supports Telnet
connections) using the Telnet protocol. The user must specify the remote host
using its IP address. The [IP address] field is mandatory. If no Port number is
specified, telnet will attempt to contact the host at the default port.
telnet [IP address] <Port #>
None
-> telnet 134.141.12.345
Trying 134.141.12.345
Connected to 134.141.12.345
SunOS UNIX (server 1)
login:
Advertisement
Table of Contents
