Changing Source Vlan And Destination Ports - Enterasys 2H25x User Manual

VLAN Redirect Configuration Screen
Table 5-6 VLAN Redirect Configuration Screen Field Descriptions
Use this field...
Frame Format
(Read-Only)
Redirect Errors
Source VLAN [n]
(Modifiable)
Destination Port [n]
(Selectable)
Frame Format
(Selectable)
Redirect Errors
Status
(Toggle)
5.7.1

Changing Source VLAN and Destination Ports

To add or delete source VLAN and destination port entries and set the Frame Format, proceed as
follows:
1. Use the arrow keys to highlight the Source VLAN field near the bottom of the screen.
2. Type in the VLAN ID number of the source VLAN to be configured.
5-20 Port Configuration Menu Screens
To...
See the current frame format setting: RECEIVED, TAGGED or
UNTAGGED. The default is RECEIVED.
•
RECEIVED – Frames are redirected in the format that they were
received by the SmartSwitch device.
•
TAGGED – Frames are transmitted on the destination port with a
VLAN tag inserted according to the frame classification of the
receiving port.
•
UNTAGGED – Frames are transmitted on the destination port
without a VLAN tag regardless of the format of the received frame.
Unsupported.
Enter the VLAN ID of the VLAN that is to be changed to a source
VLAN. If a VLAN is currently being redirected, it will not display as a
selectable VLAN. For details, refer to
Select the port number that is to be changed to a destination port. If a
port is currently being redirected, it will not display as a selectable
port. For details, refer to
Select the frame format for the transmission of redirected frames on the
destination port. RECEIVED, TAGGED, or UNTAGGED may be
selected. Refer to the previously described read-only Frame Format
field for details about each format. The default setting is RECEIVED.
Unsupported.
Add or delete source and destination ports selected in the Source
VLAN [n] and Destination Port [n] fields.
Section
Section 5.7.1.
5.7.1.