Table of Contents
Advertisement
Ethernet Interface Configuration Screen
Table 5-2 Ethernet Interface Configuration Screen Field Descriptions (Continued)
Use this field...
FDX FC
(Read-Only)
HDX FC
(Read-Only)
5-6
Port Configuration Menu Screens
To...
See the current full duplex flow control setting. Flow control is used to
manage the transmission between two devices as specified by
IEEE 802.3x to prevent receiving ports from being overwhelmed by
frames from transmitting devices. One of the following values is
displayed: Sym, AsymRx, AsymTx, Off, or NA. NA (Not Applicable)
is displayed when the port does not support flow control. Detailed
explanations of the other selections are in
Duplex Flow Control description.
See the current half duplex flow control setting. Half duplex flow
control, also known as back pressure, is a collision based flow control
mechanism used in half duplex configurations. The port will display
On, Off, or NA. NA is displayed when the port does not support flow
control.
Section
5.3, under the Full
Advertisement
Table of Contents
