Password Screen; Local Management Password Screen - Enterasys 2H25x User Manual

Password Screen

3.2 PASSWORD SCREEN
When to Use
To start a Local Management session. Local Management is controlled through the Local
Management Password screen shown in
SmartSwitch device the Local Management Password screen displays. Before continuing, you
must enter a password (community name), which is compared to the previously stored passwords.
The level of access allowed the user depends on the password. To set or change passwords, refer to
Section 4.4.
How to Access
1. Turn on the terminal. Press ENTER (this may take up to four times, because the COM port of
the SmartSwitch device auto-senses the baud rate of the terminal) until the Local Management
Password screen displays.
Screen Example
Figure 3-3 Local Management Password Screen
3-6 Accessing Local Management
Figure 3-3. Whenever a connection is made to the
Figure 3-3 shows the Password screen.