Table of Contents
Advertisement
IGMP/VLAN Configuration Procedure
7. Use the arrow keys to highlight the remaining fields: Query Interval, Query Response Time,
Interface Robustness, and Last Member Query Interval. Enter the desired numbers in each field.
If ALL was chosen as the VLAN ID, this version change will affect all VLANs seen by the
device.
8. Use the arrow keys to highlight the SAVE command and press the ENTER key to save the
information in all the fields that were changed.
The screen can now be exited. To set up a VLAN, refer to
9-8
Layer 3 Extensions Menu Screens
Chapter
7.
Advertisement
Table of Contents
