Ndp Table - Panasonic PN28240i Operation Manual

3.1.23. NDP Table

Select "Basic Config" and then "NDP Table" to open the screen shown in Figure 3-
23. On this screen, you can refer to and configure the NDP table.
Screen Description
NDP Reachable Displays the timeout value of a reachable time.
Time
NDP Stale Time Displays the timeout value of a stale time.
Total Entry Displays the number of created NDP table entries.
IPv6 Address Displays the IPv6 address on the NDP table.
Hardware Displays the hardware address on the NDP table.
Address
Status Displays the status of an adjacent cache.
Type Displays the type on the NDP table.
Static
Dynamic
Figure 3-23 NDP Table
Indicates that the ARP entry has been set manually.
Indicates that the ARP entry has been learned automati-
cally.
46