Classifier Config - Panasonic PN28240i Operation Manual

3.2.10. Classifier Config

Select "Advanced Config," and then "Classifier Config" to open the screen shown in
Figure 3-35. On this screen, you can configure the Classifier settings.
Screen Description
Classifier Index Displays the index number of Classifier.
Total Entry Displays the number of created Classifier entries.
Index Displays the index number of Classifier.
Source IP Displays the source IP address.
Address
Destination IP Displays the destination IP address.
Address
Source IPv6 Displays the source IPv6 address.
Address
Destination IPv6 Displays the destination IPv6 address.
Address
Source MAC Displays the source MAC address.
Address
Destination Displays the destination MAC address.
MAC Address
VLAN ID Displays the VLAN ID.
802.1p Priority Displays the IEEE802.1p priority.
Source Layer 4 Displays the TCP/UDP sender port number.
Port
Destination Displays the TCP/UDP destination port number.
Layer 4 Port
DSCP Displays the DSCP value.
IPv6 DSCP Displays the IPv6 DSCP value.
Protocol Displays the protocol type.
Figure 3-35 Classifier Config
61