Basic Instructions For The Use Of This Product - Panasonic PN28240i Operation Manual

Basic Instructions for the Use of This Product

●For inspection and/or repair, consult the shop.
● Use commercial power supply from a wall socket, which is close and easily
accessible to this Switching Hub.
● Unplug the power cord when installing or moving this Switching Hub.
● Unplug the power cord when cleaning this Switching Hub.
● Use this Switching Hub within the specifications. Deviation could lead to mal-
function.
● When connecting a cable, hold the Switching Hub firmly.
● Do not put a floppy disk or a magnetic card near the rubber feet (with built-in
magnets) . Otherwise, recorded content may be lost.
● After installing this Switching Hub on an OA desk, do not move either without
dismounting it. Otherwise, the desk surface may be damaged.
● Do not touch the metal terminal of the RJ45 connector, the modular plug of
connected twisted pair cable, or the metal terminal of the SFP extension slot. Do
not place charged objects in the proximity of them. Static electricity could lead
to equipment failure.
● Do not put the modular plug of the connected twisted pair cable on objects
that can carry static charge, such as carpet. Do not place it in the proximity.
Static electricity could lead to equipment failure.
● Do not put a strong shock, including dropping, to this Switching Hub. Deviation
could lead to equipment failure.
● Before connecting a console cable to the console port, discharge static electric-
ity, for example by touching metal appliance (do not discharge by touching this
Switching Hub) .
● Do not store and/or use this Switching Hub in the environment with the charac-
teristics listed below. (Store and/or use this Switching Hub in the environment in
accordance with the specification.)
- High humidity. Possible spilled liquid (water) .
- Dusty. Possible static charge (such as carpet) .
- Under direct sunlight.
- Possible condensation. High/low temperature exceeding the specifications
environment.
- Strong vibration and/or strong shock.
● Please use this Switching Hub in place where ambient temperature is from 0 to
60°C.
6