Table of Contents
Advertisement
Chapter 1
Item
WPS Button
Wi-Fi Button
Reset Button
LAN Port (1-4)
WAN Port
Power On/Off Button
Power Port
1 2 3
Side Panel
The following part is located on the side panel.
Button and Port Explanation
Item
USB 3.0 Port
Press this WPS button, and immediately press the WPS button on your client
device to start the WPS process. The
from blinking to solid on, indicating successful WPS connection.
Press and hold the Wi-Fi button for more than 2 seconds to turn on or off the
wireless function of your router.
Press and hold the button until the Power LED blinks to reset the router to its
factory default settings.
For connecting your PC or other wired devices to the router.
For connecting to a modem or an Ethernet outlet.
Press this button to power on or off the router.
For connecting the router to a power socket via the provided power adapter.
For connecting a USB storage device to the router.
Get to Know About Your Router
Description
LED of the router should change
Description
6
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer AX4400 and is the answer not in the manual?
Questions and answers
I have a tp-link ax 4400 ver.1.6 router. How do you set up wifi 6. When click advance it just sits there with a circle spinning till I close my browser.
If the advanced settings page does not load on the TP-Link Archer AX4400 router, try the following steps:
1. Reboot the Router – Power off the router, wait a few seconds, and turn it back on.
2. Check IP Settings – Ensure your computer is set to obtain an IP address automatically instead of using a static IP.
3. Verify Web Address – Make sure you enter `http://tplinkwifi.net` correctly in the web browser.
4. Reset the Router – If the issue persists, reset the router to factory settings and try accessing the settings again.
If you are setting up WiFi 6, ensure the 2.4 GHz and 5 GHz LEDs are on. If they are off, press and hold the Wi-Fi button on the back of the router for more than 2 seconds until they turn solid on.
This answer is automatically generated