Back Panel And Side Panel - TP-Link Archer BE900 User Manual

Chapter 1
1 2 2

Back Panel and Side Panel

The following parts are located on the back panel.
Item
Power On/Off Button
POWER Port
USB 3.0 Port
USB 2.0 Port
10Gbps WAN/LAN
Combo Port
10Gbps WAN/LAN Port
1Gbps LAN Port
2.5Gbps LAN Port (1-4)
Note:
10Gbps WAN/LAN Combo port, 10Gbps WAN/LAN port, and 2.5Gbps WAN/LAN port cannot be used as the WAN port
at the same time. If you choose to one of the ports as the WAN port for internet service, the other ports will be used
as LAN port by default. It's recommended to use the RJ45 port in the 10Gbps WAN/LAN Combo pair as the WAN port.
Press this button to power on or off the router.
For connecting the router to a power socket via the provided power adapter.
For connecting your USB storage devices to the router.
For connecting your USB storage devices to the router.
The combo port pairs a RJ45 port with an SFP+ port. Only one port in the
pair can be used at a time.
RJ45 port: For connecting to your modem, the Ethernet outlet or other
internet devices. Used as the WAN or LAN port.
SFP+ port: For connecting to your optical module.
For connecting to your modem, the Ethernet outlet or other internet devices.
Used as the WAN or LAN port.
For connecting your PC or other wired devices to the router.
For connecting your PC or other wired devices to the router.
Get to Know About Your Router
Description
6