Set Up A Onemesh Network - TP-Link Archer AX4400 User Manual

Dual band wi-fi 6 router
Hide thumbs Also See for Archer AX4400:
Table of Contents

Advertisement

Chapter 10
TP-Link OneMesh
one unified Wi-Fi network. Walk through your home and stay connected with the fastest
possible speeds thanks to OneMesh's seamless coverage.
Unified Wi-Fi Network
Router and extenders share the same wireless settings, including network name,
password, access control settings and more.
Seamless Roaming
Devices automatically switch between your router and extenders as you move
through your home for the fastest possible speeds.
Easy Setup and Management
Set up a OneMesh network with a push of WPS buttons. Manage all network devices
on the Tether app or at your router's web management page.
10 1

Set Up a OneMesh Network

1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
> OneMesh, and enable OneMesh.
router and TP-Link OneMesh
SAME
Network Name & Password
for seamless roaming
OneMesh with Seamless Roaming
extenders work together to form
52

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Archer AX4400 and is the answer not in the manual?

Questions and answers

Mike
March 14, 2025

I have a tp-link ax 4400 ver.1.6 router. How do you set up wifi 6. When click advance it just sits there with a circle spinning till I close my browser.

1 comments:
Mr. Anderson
March 14, 2025

If the advanced settings page does not load on the TP-Link Archer AX4400 router, try the following steps:

1. Reboot the Router – Power off the router, wait a few seconds, and turn it back on.
2. Check IP Settings – Ensure your computer is set to obtain an IP address automatically instead of using a static IP.
3. Verify Web Address – Make sure you enter `http://tplinkwifi.net` correctly in the web browser.
4. Reset the Router – If the issue persists, reset the router to factory settings and try accessing the settings again.

If you are setting up WiFi 6, ensure the 2.4 GHz and 5 GHz LEDs are on. If they are off, press and hold the Wi-Fi button on the back of the router for more than 2 seconds until they turn solid on.

This answer is automatically generated

This manual is also suitable for:

Archer ax4800

Table of Contents

Save PDF