Table of Contents
Advertisement
2 ) If you cannot find the PIN or PIN failed, you may choose
security key
Key.
3 ) If it continues to show note of
to confirm the wireless password of your wireless router.
Note: Wireless Password/Network Security Key is case sensitive.
• Windows unable to connect to XXXX / Can not join this network / Taking longer than
usual to connect to this network:
•
Check the wireless signal strength of your network. If it is weak (1~3 bars),
please move the router closer and try again.
•
Change the wireless Channel of the router to 1, 6 or 11 to reduce interference
from other networks.
•
Re-install or update the driver for your wireless adapter of the computer.
instead, and then type in the
Network Security Key
Connecting using a
Wireless Password/Network Security
Mismatch, it is suggested
111
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer AX4400 and is the answer not in the manual?
Questions and answers
I have a tp-link ax 4400 ver.1.6 router. How do you set up wifi 6. When click advance it just sits there with a circle spinning till I close my browser.
If the advanced settings page does not load on the TP-Link Archer AX4400 router, try the following steps:
1. Reboot the Router – Power off the router, wait a few seconds, and turn it back on.
2. Check IP Settings – Ensure your computer is set to obtain an IP address automatically instead of using a static IP.
3. Verify Web Address – Make sure you enter `http://tplinkwifi.net` correctly in the web browser.
4. Reset the Router – If the issue persists, reset the router to factory settings and try accessing the settings again.
If you are setting up WiFi 6, ensure the 2.4 GHz and 5 GHz LEDs are on. If they are off, press and hold the Wi-Fi button on the back of the router for more than 2 seconds until they turn solid on.
This answer is automatically generated