Table of Contents
Advertisement
FAQ
Q1 What should I do if I forget my wireless password?
The default wireless password is printed on the label of the router. If the password has
been altered:
1. Connect your computer to the router using an Ethernet cable.
2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
3. Go to
Wireless
to retrieve or reset your wireless password.
Q2 What should I do if I forget my web management password?
• If you are using a TP-Link ID to log in, or you have enabled the Password Recovery
feature of the router, click
instructions to reset it.
• Alternatively, press and hold the
to restore factory default settings, and then visit
login password.
Note:
• Please refer to
Password Recovery
• You'll need to reconfigure the router to surf the internet once the router is reset, and please mark down your new
password for future use.
Q3 What should I do if I can't log in to the router's web management
page?
This can happen for a variety of reasons. Please try the methods below to log in again.
• Make sure your computer is connected to the router correctly and the corresponding
LED indicator(s) light up.
• Make sure the IP address of your computer is configured as
automatically
and
• Make sure
http://tplinkwifi.net
• Check your computer's settings:
1 ) Go to
Start
status and
tasks.
2 ) Click
Internet Options
3 ) Click
Connections
Forgot password
Reset
to learn how to configure Password Recovery.
Obtain DNS server address
or
http://192.168.0.1
>
Control Panel
>
on the bottom left.
and select
Never dial a
on the login page and then follow the
button of the router until the Power LED blinks
http://tplinkwifi.net
automatically.
is correctly entered.
Network and
Internet, and click
connection.
to create a new
Obtain an IP address
View network
104
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer AX4400 and is the answer not in the manual?
Questions and answers
I have a tp-link ax 4400 ver.1.6 router. How do you set up wifi 6. When click advance it just sits there with a circle spinning till I close my browser.
If the advanced settings page does not load on the TP-Link Archer AX4400 router, try the following steps:
1. Reboot the Router – Power off the router, wait a few seconds, and turn it back on.
2. Check IP Settings – Ensure your computer is set to obtain an IP address automatically instead of using a static IP.
3. Verify Web Address – Make sure you enter `http://tplinkwifi.net` correctly in the web browser.
4. Reset the Router – If the issue persists, reset the router to factory settings and try accessing the settings again.
If you are setting up WiFi 6, ensure the 2.4 GHz and 5 GHz LEDs are on. If they are off, press and hold the Wi-Fi button on the back of the router for more than 2 seconds until they turn solid on.
This answer is automatically generated