Table of Contents
Advertisement
Chapter 8
•
Method 2:
Open the
address
press Enter.
Windows
computer
1 ) Select
2 ) Type the server address smb://tplinkwifi.net.
3 ) Click Connect.
Mac
4 ) When prompted, select the
username and a password to deny anonymous access to the USB
disks, you should select the
to set up an account for the access, refer to
for Data
Tablet
Use a third-party app for network files management.
Tips:
You can also access your USB storage device by using your Network/Media Server Name as the server address. Refer
to
To Customize the Address of the USB Storage Device
8 1 2
Access the USB Device Remotely
You can access your USB disk outside the local area network. For example, you can:
Windows Explorer
\\tplinkwifi.net
or
ftp://tplinkwifi.net
Go
>
Connect to
Server.
Security.)
to learn more.
(or go to Computer) and type the server
in the address bar, then
Guest
radio box. (If you have set up a
Registered User
radio box. To learn how
To Set Up Authentication
USB Settings
40
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer AX4400 and is the answer not in the manual?
Questions and answers
I have a tp-link ax 4400 ver.1.6 router. How do you set up wifi 6. When click advance it just sits there with a circle spinning till I close my browser.
If the advanced settings page does not load on the TP-Link Archer AX4400 router, try the following steps:
1. Reboot the Router – Power off the router, wait a few seconds, and turn it back on.
2. Check IP Settings – Ensure your computer is set to obtain an IP address automatically instead of using a static IP.
3. Verify Web Address – Make sure you enter `http://tplinkwifi.net` correctly in the web browser.
4. Reset the Router – If the issue persists, reset the router to factory settings and try accessing the settings again.
If you are setting up WiFi 6, ensure the 2.4 GHz and 5 GHz LEDs are on. If they are off, press and hold the Wi-Fi button on the back of the router for more than 2 seconds until they turn solid on.
This answer is automatically generated