Table of Contents
Advertisement
Chapter
15
Manage the Router
This chapter will show you the configuration for managing and maintaining your router.
It contains the following sections:
•
Upgrade the Firmware
•
Backup and Restore Configuration Settings
•
Change the Login Password
•
Password Recovery
•
Local Management
•
Remote Management
•
System Log
•
Test the Network Connectivity
•
Set System Time and Language
•
Set the Router to Reboot Regularly
•
Control the LED
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer AX4400 and is the answer not in the manual?
Questions and answers
I have a tp-link ax 4400 ver.1.6 router. How do you set up wifi 6. When click advance it just sits there with a circle spinning till I close my browser.
If the advanced settings page does not load on the TP-Link Archer AX4400 router, try the following steps:
1. Reboot the Router – Power off the router, wait a few seconds, and turn it back on.
2. Check IP Settings – Ensure your computer is set to obtain an IP address automatically instead of using a static IP.
3. Verify Web Address – Make sure you enter `http://tplinkwifi.net` correctly in the web browser.
4. Reset the Router – If the issue persists, reset the router to factory settings and try accessing the settings again.
If you are setting up WiFi 6, ensure the 2.4 GHz and 5 GHz LEDs are on. If they are off, press and hold the Wi-Fi button on the back of the router for more than 2 seconds until they turn solid on.
This answer is automatically generated