Table of Contents
Advertisement
Chapter 6
Note:
•
The Effective Time Schedule is based on the time of the router. Make sure the System settings are correct. You can
go to
Advanced
>
System
•
The wireless network will be automatically turned on after the time period you set.
6 3
Use WPS for Wireless Connection
Wi-Fi Protected Setup (WPS) provides an easier approach to set up a security-protected
Wi-Fi connection.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Make sure the Wi-Fi of your router is on and go to
6 3 1
Connect via the Client's PIN
Enter the PIN of your device and click Connect. Then your device will get connected to
the router.
6 3 2
Connect via the Router's PIN
Select
Router's PIN
in
generate a new one.
Note:
>
Time & Language
to modify the time.
Method 1
to enable
Advanced
Router's
PIN. You can use the default PIN or
Wireless Settings
>
Wireless
> WPS.
31
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer AX4400 and is the answer not in the manual?
Questions and answers
I have a tp-link ax 4400 ver.1.6 router. How do you set up wifi 6. When click advance it just sits there with a circle spinning till I close my browser.
If the advanced settings page does not load on the TP-Link Archer AX4400 router, try the following steps:
1. Reboot the Router – Power off the router, wait a few seconds, and turn it back on.
2. Check IP Settings – Ensure your computer is set to obtain an IP address automatically instead of using a static IP.
3. Verify Web Address – Make sure you enter `http://tplinkwifi.net` correctly in the web browser.
4. Reset the Router – If the issue persists, reset the router to factory settings and try accessing the settings again.
If you are setting up WiFi 6, ensure the 2.4 GHz and 5 GHz LEDs are on. If they are off, press and hold the Wi-Fi button on the back of the router for more than 2 seconds until they turn solid on.
This answer is automatically generated