Table of Contents
Advertisement
Chapter 8
1 ) Open the
users) or open a web browser.
2 ) Type the server address in the address bar:
Type in
as ftp://59.40.2.243:21). If you have specified the domain name
of the router, you can also type in
number>
Computer
3 ) Press
4 ) Access with the username and password you set in
Authentication for Data
Tips:
You can also access the USB disk via a third-party app for network files management, which can
resume broken file transfers.
Tablet
Use a third-party app for network files management.
Tips:
Click
Set Up a Dynamic DNS Service Account
8 1 3
Customize the Access Settings
By default, all the network clients can access all folders on your USB disk. You can
customize your sharing settings by setting a sharing account, sharing specific contents
and setting a new sharing address on the router's web management page.
1
Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2
Go to
Advanced
•
To Customize the Address of the USB Storage Device
You can customize the server name and use the name to access your USB storage
device.
1
In the
Access Method
Network/Media Server Name
Windows Explorer
ftp://<WAN IP address of the router>:<port number>
(such as ftp://MyDomainName:21)
Enter
on the keyboard.
to learn how to set up a domain name for you router.
>
USB
>
USB Storage
session, make sure
as you like, such as MyShare, then click Save.
(or go to Computer, only for Windows
ftp://<domain name>:<port
Security.
Device.
Samba for Windows
USB Settings
(such
To Set Up
is ticked, and enter a
42
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer AX4400 and is the answer not in the manual?
Questions and answers
I have a tp-link ax 4400 ver.1.6 router. How do you set up wifi 6. When click advance it just sits there with a circle spinning till I close my browser.
If the advanced settings page does not load on the TP-Link Archer AX4400 router, try the following steps:
1. Reboot the Router – Power off the router, wait a few seconds, and turn it back on.
2. Check IP Settings – Ensure your computer is set to obtain an IP address automatically instead of using a static IP.
3. Verify Web Address – Make sure you enter `http://tplinkwifi.net` correctly in the web browser.
4. Reset the Router – If the issue persists, reset the router to factory settings and try accessing the settings again.
If you are setting up WiFi 6, ensure the 2.4 GHz and 5 GHz LEDs are on. If they are off, press and hold the Wi-Fi button on the back of the router for more than 2 seconds until they turn solid on.
This answer is automatically generated