Table of Contents
Advertisement
Chapter 15
1 )
Email From:
2 ) Select
Require
Tips: Generally, Require Password should be selected if the login of the mailbox requires username and password.
3 )
Username:
Enter the email address used for sending the system log.
4 )
Email Password:
5 )
SMTP Server:
Tips: SMTP server is available for users in most webmail systems. For example, the SMTP server address of
Hotmail is smtp-mail.outlook.com.
6 )
Email To:
Enter the recipient's email address, which can be the same as or
different from the sender's email address.
7 ) Select
Mail Log
Tips: The router will send the system log to the designated email address if this option is enabled.
8 )
Frequency:
This determines how often the recipient will receive the system log .
5. Click SAVE.
15 8
Test the Network Connectivity
Diagnostics is used to test the connectivity between the router and the host or other
network devices.
Enter the email address used for sending the system log.
Password.
Enter the password to login the sender's email address.
Enter the SMTP server address.
Automatically.
Manage the Router
97
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer AX4400 and is the answer not in the manual?
Questions and answers
I have a tp-link ax 4400 ver.1.6 router. How do you set up wifi 6. When click advance it just sits there with a circle spinning till I close my browser.
If the advanced settings page does not load on the TP-Link Archer AX4400 router, try the following steps:
1. Reboot the Router – Power off the router, wait a few seconds, and turn it back on.
2. Check IP Settings – Ensure your computer is set to obtain an IP address automatically instead of using a static IP.
3. Verify Web Address – Make sure you enter `http://tplinkwifi.net` correctly in the web browser.
4. Reset the Router – If the issue persists, reset the router to factory settings and try accessing the settings again.
If you are setting up WiFi 6, ensure the 2.4 GHz and 5 GHz LEDs are on. If they are off, press and hold the Wi-Fi button on the back of the router for more than 2 seconds until they turn solid on.
This answer is automatically generated