Table of Contents
Advertisement
Chapter 15
4. Use the new password for future logins.
15 4
Password Recovery
This feature allows you to recover the login password you set for you router in case you
forget it.
Note: If you are using a TP-Link ID to log in to the web management page, the Password Recovery feature will be
disabled. To manage the TP-Link ID, go to
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
Advanced
>
section.
3. Tick the
Enable
box of
4. Specify a
mailbox (From)
address. Specify a
to send the recovery letter requires encryption, Tick the
and enter its username and password.
Tips:
•
SMTP server is available for users in most webmail systems. For example, the SMTP server address of Gmail
is smtp.gmail.com.
•
Generally, Authentication should be enabled if the login of the mailbox requires username and password.
5. Click SAVE.
To recover the login password, please visit http://tplinkwifi.net, click
on the login page and follow the instructions to set a new password.
Advanced
>
TP-Link
System
>
Administration
Password
Recovery.
for sending the recovery letter and enter its
mailbox (To)
for receiving the recovery letter. If the mailbox (From)
ID.
and focus on the
Enable
box of
Manage the Router
Password Recovery
SMTP Server
Authentication
Forgot Password?
91
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer AX4400 and is the answer not in the manual?
Questions and answers
I have a tp-link ax 4400 ver.1.6 router. How do you set up wifi 6. When click advance it just sits there with a circle spinning till I close my browser.
If the advanced settings page does not load on the TP-Link Archer AX4400 router, try the following steps:
1. Reboot the Router – Power off the router, wait a few seconds, and turn it back on.
2. Check IP Settings – Ensure your computer is set to obtain an IP address automatically instead of using a static IP.
3. Verify Web Address – Make sure you enter `http://tplinkwifi.net` correctly in the web browser.
4. Reset the Router – If the issue persists, reset the router to factory settings and try accessing the settings again.
If you are setting up WiFi 6, ensure the 2.4 GHz and 5 GHz LEDs are on. If they are off, press and hold the Wi-Fi button on the back of the router for more than 2 seconds until they turn solid on.
This answer is automatically generated