Title TransVu 3 DVR Installation Manual
Page 53 of 66.
Alarm Display Mode: Allows the monitor output of the unit to automatically display the primary
camera for the alarm when the alarm event is active.
Alarm Alert Timeout: Sets a period, in seconds, after which an alarm alert will time out.
Revert Display mode: If ticked, the monitor display will revert to it's previous setting after the alarm
timeout period has expired.
Local Relay 1/2: Sets the condition of relays 1 and 2 as normally open (N/O) or normally closed
(N/C).
On Contact: Chooses which relays will respond to the different conditions listed.
Network Pages
The Network pages configure the various network settings of the unit and features which use
network connectivity.
Network – Setup page
The page configures the network connection to the TransVu 3 and displays current settings.
System Name: This field can be edited to allocate a name to the unit. This would be used if
accessing the unit using a Domain Name Server (DNS). The setting is the same as the system name
displayed in the System Attributes menu and defaults to the unit serial number.
IP Address: IP Address is a 32-bit number that uniquely identifies a unit on a TCP/IP network. To
set DHCP usage and obtain an IP address from the general/corporate network set address to
0.0.0.0
NetVu Ltd. www.netvu.org.uk
No 1 Thellow Heath Park, Northwich Road, Northwich, Cheshire. CW9 6JB
Need help?
Do you have a question about the TransVu 3 and is the answer not in the manual?