Table of Contents
Advertisement
Title TransVu 3 DVR Installation Manual
Page 38 of 66.
This page configures the spot monitor display.
Spot monitor text: Enables/Disables text display on the spot monitor.
Show camera title: When ticked, the camera title is displayed.
Show system time: When Ticked, the system time is displayed.
Spot sequence dwell: Sets the time in seconds for the sequential display of cameras.
Select All: Selects all cameras for sequential display.
Camera Pages
These pages configure the camera inputs of the unit.
Camera – Setup Page
This menu allows the configuration of active camera channels.
Note: Ideally any setup options available locally on the camera should first be used to best obtain
a suitable image quality.
Camera: Select the channel to be configured using the drop-down list.
Camera Nuisance Count: If a camera failure alarm is received, the unit will store the alarm time and
monitor the number of times the same alarm is triggered within an hour. If this stored figure
exceeds the number entered here, the unit will cease sending reports until the fail condition has
stopped. To disable this feature, leave the setting as "0".
NetVu Ltd. www.netvu.org.uk
No 1 Thellow Heath Park, Northwich Road, Northwich, Cheshire. CW9 6JB
Advertisement
Table of Contents
