Table of Contents
Advertisement
Title TransVu 3 DVR Installation Manual
Page 41 of 66.
Alarm Setting Pages
The Alarm Settings menus allow configuration of the unit's alarm functionality. Individual alarm
inputs and alarm zones can be configured. Global relays can be activated and the Activity grid set
up.
Refer to the individual menus for further details.
The Alarm Input page allows configuration of alarm channels. Up to 6 alarm channels are available.
The VMD/Activity Response page enables configuration of responses following an VMD/Activity
Detection trigger.
The Activity Setup page allowed activation and configuration of the Activity feature on all video
inputs. The Activity feature enables cameras to automatically detect any movement/changes within
the video scene. This can trigger a number of operations such as FTP alarm notification or an
increase in the recording rate.
The VMD Configuration page enables the unit's VMD (Video Motion Detection) to be set-up. VMD
allows a camera to automatically detect if there is any movement/changes within specific areas of
the video scene.
Expressions Wizard Page
This page is used to configure the way that the TransVu will respond to triggers from a variety of
sources.
NetVu Ltd. www.netvu.org.uk
No 1 Thellow Heath Park, Northwich Road, Northwich, Cheshire. CW9 6JB
Advertisement
Table of Contents
