Handling And Storage Of Lcd Display Component - GE B30 Technical Reference Manual

3.2 Handling and storage of LCD display component

Handling of LCD display component and protective window
If the LCD Display component surface becomes dusty, wipe it gently with absorbent cotton,
chamois or other soft material. If necessary, breathe onto the display surface and wipe
immediately. The display surface may also be cleaned using a small amount of normal
hexane. Do not use acetone, toluene or alcohol because they cause chemical damage to the
polarizer.
1. Wipe off saliva and water drops as soon as possible. Their prolonged contact with the
polarizer cause deformations and color fading.
2. Do not open the component case because internal circuits are sensitive to electrostatic
discharges.
Taking a spare part LCD Display component or a display shield into use:
Peel off the protective film slowly (in more than 10 seconds) from the display or protective
window surface. Fast peeling may generate enough static electricity to destroy the LCD
Display component.
Storaging an LCD display component as a spare part for a long period
1. Store the display in a dark place. Do not expose it to sunlight or fluorescent light. Keep the
temperature between -30 °C and 85 °C / -22 °F and 185 °F at 5% to 95% humidity.
2. The polarizer surface should not come into contact with any other object. It is
recommended that the display unit is stored in the container in which it was originally
shipped.
Frame disassembly
6-19
Document no. 2044677-001