GE B30 Technical Reference Manual page 176

B30 Patient Monitor
To remove the interconnection and
UI board
To remove the network connector
board unit
To remove the CPU board
6-16
.
Document no 2044677-001
- Remove the three screws (T10) holding the plastic flex board
cover.
- Remove the interconnection and UI board carefully from the
frame.
- Remove the screw (T10) holding the unit to the frame.
- Disconnect the cable coming from the Network connector
board
- Remove the Network connector board
- Disconnect all the rest cables from the CPU board.
- Remove the eight screws (T10) holding the CPU board to the
frame.
- Lift the CPU board carefully up and remove it from the
frame.