Table of Contents
Advertisement
3.1.2.1 Date Stamp
Date stamp is used to stamp your photos with the time and date that they are taken. To select your preferred time and date
format follow the instructions below.
1. Enter the Photo screen.
2. Press the
3. Use the
to select.
4. Use the
your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you are in the Photo screen when you access the menu.
3. The Date Stamp setting is not used to set the cameras internal clock. To set the time follow the instructions Date/Time (3.2.1) in the settings section.
3.2 Playback Screen
This screen is used to playback photos and videos. To access the Playback screen ensure that the camera is not recording and
press the
(Mode) button. This will send the camera to the photo screen. While in the Photo Screen press the
button again which will bring you to the Playback Screen. In this screen the
recorded videos and photos and the
buttons to adjust the playback speed. In the Playback Screen photos and videos can also be locked and deleted via the Playback
Menu. This menu can be accessed by pressing the
3.3 Playback Menu
3.3.1 Deleting Photos and Videos
To delete an unlocked photo or video follow the instructions below.
1. Navigate to the playback screen using the instructions in the section labelled Playback Screen.
24
(Menu) Button to enter the Photo Menu .
and
Buttons to navigate the Photo Menu and highlight the Date Stamp setting and press
and
Buttons to highlight either Date, Date/Time or ON, then press the
(Rec/Ok) button is used to play and pause videos. While playing a video the
and
(Menu) button in the Photo Screen.
(Rec/Ok) button to confirm
(Mode)
buttons are used to cycle through the
(Rec/Ok)
and
Advertisement
Table of Contents
